Hyundai Santa Fe (DM): Inside Rear View Components and Components Location
Component Location
|
1. Inside rear view mirror |
|
Outside Rear View Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Inside Rear View Repair procedures
Replacement [Manual Mirror] • Put on gloves to protect your hands. 1. Loosen the inside rear view mirror mounting screw (C). 2. Push the inside rear view mirror base (B) up to remove the inside rear ...
See also:
Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be held to ...
Rear Coil Spring. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...
Fuse switch
Always, put the mode switch at the ON position. If you move the switch to the OFF position, some items such as audio and digital clock must be reset and transmitter (or smart key) may not work properly. ...
