Hyundai Santa Fe (DM): Instrument Cluster. Components and Components Location
Components
Connector Pin Information
No. |
Description |
No. |
Description |
1 |
- |
21 |
- |
2 |
Illumination output |
22 |
- |
3 |
Rheostat down switch |
23 |
4P output |
4 |
Rheostat up switch |
24 |
Immobilizer |
5 |
AT N output |
25 |
AT S output |
6 |
Oil pressure |
26 |
AT R output |
7 |
Low washer |
27 |
AT P output |
8 |
Charge |
28 |
- |
9 |
AT D output |
29 |
- |
10 |
Illumination + |
30 |
MM_CAN High |
11 |
- |
31 |
MM_CAN Low |
12 |
Active ECO |
32 |
C_CAN High |
13 |
Heated wheel indicator |
33 |
C_CAN Low |
14 |
Fuel |
34 |
Trip switch1 |
15 |
Detent output |
35 |
Trip switch2 |
16 |
Fuel ground |
36 |
Trip switch ground |
17 |
- |
37 |
Signal ground |
18 |
Speaker - |
38 |
- |
19 |
Speaker + |
39 |
IGN + |
20 |
Aig bag + |
40 |
Battery + |
Components and Components Location
Component Location 1. Cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fluid level warning switch 7. Parking brake switch ...Instrument Cluster. Schematic Diagrams
Circuit Diagram ...See also:
Side Airbag (SAB) Module. Components and Components Location
Components ...
Fuel Tank Pressure Sensor (FTPS). Schematic Diagrams
Circuit Diagram ...
Rear Lower Arm. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...