Hyundai Santa Fe (DM): Intake Air Temperature Sensor (IATS). Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute
Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air temperature is
needed because air density varies according to the temperature. So the ECM uses
not only MAPS signal but also IATS signal. This sensor has a Negative Temperature
Coefficient (NTC) Thermister and it's resistance changes in reverse proportion
to the temperature.
Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition ...
Intake Air Temperature Sensor (IATS). Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 40.93 ~ 48.35 -20 -4 13.89 ~ 16.03 0 32 5.38 ~ 6.09 10 50 3.48 ~ 3.90 20 68 2.31 ~ 2.57 40 104 1.08 ~ 1.21 60 140 0.54 ~ 0.62 80 176 0.29 ...
See also:
Door Scuff Trim. Components and Components Location
Component Location 1. Front door scuff trim 2. Rear door scuff trim ...
Repair procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. 2. Remove the front door module. 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power ...
Parking Brake Lever Assembly. Repair procedures
Removal The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. 1. Remove the floor console assembly. 2. Disconnect the connector (A) of parking ...
