Hyundai Santa Fe (DM): Intake Air Temperature Sensor (IATS). Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Santa Fe (DM): Intake Air Temperature Sensor (IATS). Repair procedures

Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS). Repair procedures

Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”

Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram ...

Engine Coolant Temperature Sensor (ECTS). Description and Operation
Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor that changes ...

See also:

Rear Wheel Speed Sensor. Components and Components Location
Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

Door Garnish. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram ...