Hyundai Santa Fe (DM): Interior. Body Repair
Interior A
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior B
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior C
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Interior D
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
|
Curtain airbag mounting hole (Ø6.6) |
Curtain airbag mounting hole (Ø6.6) |
Cowl crossbar mounting hole (Ø9) |
|
|
|
|
|
Front door checker mounting hole (Ø13) |
Cowl side trim mounting hole (Ø8.5) |
Curtain airbag mounting hole (Ø6.6) |
|
|
|
|
|
Curtain airbag mounting hole (Ø6.6) |
1st seat belt height adjuster upper mounting hole (Ø14.5) |
1st seat belt height adjuster lower mounting hole (Ø14.5) |
|
|
|
|
|
Rear door checker mounting hole (Ø13) |
1st seat belt pretensioner mounting hole (Ø14.5) |
Curtain airbag mounting hole (Ø6.6) |
|
|
|
|
|
2nd seat belt upper mounting hole (Ø14.5) |
Rear door striker mounting hole (Ø13) |
2nd seat belt lower anchor mounting hole (Ø14.5) |
|
|
|
|
|
Curtain airbag mounting hole (Ø6.6) |
2nd seat belt retractor mounting hole (Ø14.5) |
2nd seat belt retractor mounting hole (Ø14.5) |
|
|
|
|
|
Quarter inner panel tooling hole (Ø14.5) |
Quarter inner panel tooling hole (Ø14.5) |
Luggage side trim mounting hole (Ø8.5) |
|
|
|
|
|
Luggage side trim mounting hole (Ø12) |
Rear end cross member tooling hole (Ø17.4) |
Side sill inner reinforcement tooling hole (Ø7) |
|
|
|
|
|
Floor wiring harness mounting hole (12X7) |
Floor wiring harness mounting hole (12X7) |
2nd seat mounting hole (Ø15) |
|
|
|
|
|
Rear floor panel tooling hole (8.5X8.5) |
1st seat mounting hole (Ø11) |
|
Side Body. Body Repair
Side Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side Body B * These dimensions indicated in this figure are actual-measurement dimensions. ...
Rear Body. Body Repair
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer panel rear corner Tail gate hinge mounting hole (Ø12) Tail gate hinge mounting hole ...
See also:
Climate information screen selection
Press the climate information screen selection button to display climate information on the screen. ...
To defog inside windshield
1. Select desired temperature. 2. Select desired fan speed. 3. Press the defrost button (). 4. The outside (fresh) air position will be selected automatically. If the outside (fresh) air position is not ...
Daytime running light
Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, and it is especially helpful after dawn ...
