Hyundai Santa Fe (DM): License plate lamp bulb replacement
1. Loosen the lens retaining screws with a screwdriver.
2. Remove the lens.
3. Remove the bulb.
4. Install a new bulb.
5. Reinstall the lens securely with the lens retaining screws.
High mounted stop lamp replacement
1.Open the tailgate. 2.Gently remove the center cover of the rear tailgate trim. 3.Disconnect the electrical connector. 4.Loosen the retaining nuts and remove the spoiler. 5.Remove the high mounted stop ...Interior lamp bulb replacement
WARNING Prior to working on the Interior Lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry ...See also:
Delta Garnish. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle ...
Tail Gate Weatherstrip. Repair procedures
Replacement 1. Remove the tail gate weatherstrip (A). • Do not apply sealant to the body. 2. Install in the reverse order of removal. • Install the weatherstrip aligned with canter line (B). ...