Hyundai Santa Fe (TM): Important Safety Notice - General InformationHyundai Santa Fe (TM): Important Safety Notice

Important Safety Notice
Proper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator. The service procedures and descriptions in this shop manual provide general directions for a service and repair.
Procedure, techniques, tools, and parts for service including the skill of the technician vary. It is impossible to provide advice or caution as to each case in this manual.
Accordingly, anyone who intends to use a replacement part, service procedure, or tool, which is not recommended by the vehicle manufacturer, must first assure thoroughly that neither their personal safety nor the safe operation of the vehicle will be first jeopardized by the replacement part, service procedure, or tool they select.
  
•
Reminds you to be especially careful in those areas where carelessness will cause death or serious injury.
  
•
Reminds you to be especially careful in those areas where carelessness may cause death or serious injury.
  
•
Reminds you to be especially careful in those areas where carelessness may cause personal injury.
  
•
Gives you information that will prevent you from making errors that could damage the vehicle.
  
•
Gives you added information that will help you complete a particular procedure.
The following list contains some general WARNINGS that you should follow while working on a vehicle.
•
Always wear safety glasses for eye protection.
•
Use safety stands whenever a procedure requires you to be under the vehicle.
•
Make sure that the ignition switch is always in the OFF position, unless otherwise required by the procedure.
•
Set the parking brake when working on the vehicle. If you have an automatic transaxle, set in park unless instructed otherwise for a specific operation.
•
Place supporters against the front and rear surfaces of the tires to help prevent the vehicle from moving.
•
Operate the engine only in a well-ventilated area to avoid the danger of carbon monoxide poisoning.
•
Keep yourself and your clothing away from moving parts when the engine is running, especially the drive belts.
•
To prevent serious burns, avoid contact with hot metal parts such as the radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
•
Do not smoke while working on a vehicle.
•
To avoid injury, always remove rings, watches, loose hanging jewelry, and loose clothing before beginning to work on a vehicle.
•
When it is necessary to work under the hood, keep phands and other objects clear of the radiator fan blades! Your vehicle may be equipped with a cooling fan that may turn on, even though the ignition switch is in the OFF position. For this reason care should be taken to ensure that the radiator fan electric motor is completely disconnected when working under the hood and the engine is not running.
General Tightening Torque Table
Tightening Torque Table of Standard Parts BOLT (Nominal diameter) NUT (Nominal diameter) BOLT/NUT Normal screw Torque Nm (kg.m, Ib-ft) Nominal diameter. (mm) Pitch [mm (in.) ] 4T 8T 10T M5 0.8 (0.031) ...

Identification Numbers
Identification Number Identification Number Description Vehicle Identification Number 1. World Manufacturer Identifier (WMI) - KMH : Passenger vehicle or MPV(Multipurpose Passenger Vehicle)/SUV(Sports ...

See also:

Outside lamp
1. Open the tailgate. 2. Remove the service cover using a flat-blade screwdriver. 3. Loosen the lamp assembly retaining please verify. 4. Remove the rear combination lamp assembly from the body of the ...

Specifications
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) ▷ Type: Piezo-Resistive ...

Outside Rear View Components and Components Location
Component Location 1. Outside rear view mirror ...