Hyundai Santa Fe (DM): Main Crash Pad Assembly. Repair procedures
Replacement
|
|
1. |
Remove the front pillar trim.
|
2. |
Remove the cowl side trim.
|
3. |
Remove the instrument cluster.
|
4. |
Remove the crash pad center lower panel.
|
5. |
Remove the steering column shroud lower panel.
|
6. |
Remove the steering wheel.
|
7. |
Remove the multifunction switch assembly.
|
8. |
After loosening the mounting screws, then remove the crash pad
side switch (A).
|
9. |
Disconnect the crash pad side switch connector (A).
|
10. |
Using a screwdriver or remover, remove the center speaker grill
(A).
|
11. |
After loosening the mounting screws, then remove the center speaker
assembly (A).
|
12. |
Disconnect the center speaker connector (A).
|
13. |
Using a screwdriver or remover, remove the photo sensor (A).
|
14. |
Disconnect the photo sensor connector (B).
|
15. |
Loosen the mounting nuts.
|
16. |
Disconnect the passenger's airbag connectors (A).
|
17. |
After loosening the mounting bolts and nuts, then remove the main
crash pad assembly (A).
|
18. |
Install in the reverse order of removal.
|
Main Crash Pad Assembly. Components and Components Location
Component Location 1. Main crash pad assembly ...Cowl Cross Bar Assembly. Components and Components Location
Component Location 1. Cowl cross bar assembly ...See also:
Driving at night
Because night driving presents more hazards than driving in the daylight, here are some important tips to remember: Slow down and keep more distance between you and other vehicles, as it may be more difficult ...
Audio Remote Control. Repair procedures
Inspection 1. Check for resistance between terminals in each switch position. [Audio] Switch Connector terminal Resistance (± 5%) SEEK up 2-7 430 Ω SEEK down 2-7 1.11 kΩ Mode 2-7 2.11 kΩ ...
Fuel Pump. Repair procedures
Inspection [Fuel pump motor] 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump assembly. 3. Check motor operation by fuel pump connector (A) connecting power (No.4) ...