Hyundai Santa Fe (DM): Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection
1. |
Connect the GDS on the Data Link Connector (DLC).
|
2. |
Measure the output voltage of the MAPS at idle and IG ON.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the manifold absolute pressure sensor connector (A).
|
3. |
Remove the installation bolt (B), and then remove the sensor from
the surge tank.
|
Installation
|
|
1. |
Install in the reverse order of removal.
|
Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram ...Intake Air Temperature Sensor (IATS). Description and Operation
Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air temperature ...See also:
Climate information screen selection
Press the climate information screen selection button to display climate information on the screen. ...
Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form ...
Shift lock system
For your safety, the automatic transaxle has a shift lock system which prevents shifting the transaxle from P (Park) or N (Neutral) into R (Reverse) unless the brake pedal is depressed. To shift the transaxle ...