Hyundai Santa Fe (DM): Map lamp - Interior light - Features of your vehicleHyundai Santa Fe (DM): Map lamp

Type A

Type A

Type B

Type B

Press the lens (1) to turn the map lamp on or off

  • ON (2): The map lamp and room lamp stays on at all times.
  • OFF (3): The lamps are off even if a door is opened.
  • ROOM (4): The map lamp and room lamp stays on at all times.
  • DOOR (5):
    - The map lamp and room lamp comes on when a door is opened. The lamps go out after approximately 30 seconds.
    - The map lamp and room lamp comes on for approximately 30 seconds when doors are unlocked with a transmitter or smart key as long as the doors are not opened.
    - The map lamp and room lamp will stay on for approximately 20 minutes if a door is opened with the ignition switch in the ACC or LOCK/OFF position.
    - The map lamp and room lamp will stay on continuously if the door is opened with the ignition switch in the ON position.
    - The map lamp and room lamp will go out immediately if the ignition switch is changed to the ON position or all doors are locked.

✽ NOTICE

When the lamp is turned on by pressing the lens (1), the lamp does not turn off even if the switch is in the OFF position (3).

Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off. If your vehicle is equipped with the theft alarm system, the interior lights automatically turn ...

Room lamp
Type A Type B Press the button to turn the light on or off. CAUTION Do not leave the lamp switches on for an extended period of time when the vehicle is not running because the battery may drain. ...

See also:

Seat Heater Switch. Schematic Diagrams
Circuit Diagram ...

Rear combination lamp bulb replacement
(1) Rear stop and tail lamp (2) Rear tail lamp (3) Rear turn signal lamp (4) Back-up lamp (5) Rear side marker ...

Front Bumper Cover. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...