Hyundai Santa Fe (DM): Master Cylinder. Repair procedures
Removal
1. |
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the air cleaner assembly.
|
3. |
Disconnect the brake fluid level switch connector (B), and remove
the reservoir cap.
|
4. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
5. |
Disconnect the brake tube (A) from the master cylinder by loosening
the tube flare nut.
|
6. |
Remove the master cylinder (B) from the brake booster after loosening
the mounting nuts (A).
|
Installation
1. |
Installation is the reverse of removal.
|
2. |
After installation, bleed the
|
Master Cylinder. Components and Components Location
Components 1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...Brake Line. Components and Components Location
Components ...See also:
Front Wiper Motor. Components
and Components Location
Component Location 1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly 8. Wiper motor connector ...
Assist Handle. Components and Components Location
Component Location 1. Assist handle ...
Emergency starting
Connect cables in numerical order and disconnect in reverse order. ...