Hyundai Santa Fe (DM): Movable Glass. Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Santa Fe (DM): Movable Glass. Repair procedures

Replacement

1.
Tilt the rear part of the movable glass (A) using the panorama sunroof switch.
2.
Remove both sides of the decoration cover (A).
3.
Loosen the mounting screws (A) on both sides.
•
Be careful not to damage the screws.

4.
Carefully lift up the movable glass (A) and then remove it.
5.
Install in the reverse order of removal.
•
After replacing the movable glass adjust the alignment if needed.

Repair procedures
Adjustment Inspect Glass Alignment 1. Inspect the alignment of the movable glass (C) that is between the front (A) and rear (B) glass and if needed adjust it. Alignment adjustment Standard value [mm(in.)] ...

Panorama sunroof
...

See also:

Climate control air filter
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If dust ...

Illuminated ignition switch
Whenever a front door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition ...

Vehicle certification label
The vehicle certification label attached on the driver’s side center pillar gives the vehicle identification number (VIN). ...