Hyundai Santa Fe (DM): Muffler. Repair procedures - Intake And Exhaust System - Engine Mechanical SystemHyundai Santa Fe (DM): Muffler. Repair procedures

Removal and Installation

1.
Remove the front muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

2.
Remove the center muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

3.
Remove the main muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

4.
Install in the reverse order of removal.
When installing, replace with new gaskets.

Muffler. Components and Components Location
Components 1.  Front muffler 2.  Catalytic converter 3. Center muffler 4. Main muffler ...

Engine Electrical System
...

See also:

Rear Seat Latch. Repair procedures
Replacement [Second row seat assembly] • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, ...

Reservoir Tank. Repair procedures
Removal and Installation 1. Remove the over flow hose(A). 2. Remove the reservoir tank(B). Tightening torque: 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft) 3. Install in the reverse order of removal. ...

Troubleshooting
Troubleshooting Customer Complaint Analysis Check Sheet There are six areas where a problem can occur: wiring harness, the radio, the CD player, and speaker. Troubleshooting enables you to confine the ...