Hyundai Santa Fe (DM): Oil hydraulic Motor(Actuator). Repair procedures
Inspection
If you have trouble code related to the oil hydraulic motor (actuator),
check oil hydraulic motor (actuator) according to the inspection process.
|
Oil Hydraulic Motor (Actuator) Inspection Procedure |
Removal
1. |
Remove the coupling assembly.
|
2. |
Keep going perpendicular state after remove the coupling assembly.
|
3. |
Remove the hydraulic motor (A) after loosening bolts with hex
wrench.
|
Installation
1. |
Before installation, wipe the surface with a clean cloth.
|
2. |
Check the O-rings (A) of the new hydraulic motor (actuators).
|
3. |
Tighten the bolts after install the hydraulic motor (actuators).
|
4. |
Wipe the flowed oil to around the surface with a clean cloth.
|
5. |
Install the coupling assembly.
|
Oil hydraulic Motor(Actuator). Schematic Diagrams
Circuit Diagram ...Pressure Sensor. Description and Operation
Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque ...See also:
Flex Steer. Description and Operation
Instruction Flex Steer is system to choose the three modes power steering depending on driver preference or driving conditions. • Display on the cluster but power steering is would not changed while ...
Rear Bumper Cover. Components and Components Location
Component Location 1. Rear bumper cover ...
Steering wheel audio control
The steering wheel may incorporate audio control buttons. CAUTION Do not operate audio remote control buttons simultaneously. MODE (1) Press the button to change audio source. PRESET/SEEK (/) (2) The ...