Hyundai Santa Fe (DM): Oil Level Gauge & Pipe. Repair procedures - Lubrication System - Engine Mechanical SystemHyundai Santa Fe (DM): Oil Level Gauge & Pipe. Repair procedures

Removal and Installation

1.
Remove the oil gauge(A).
рулонні штори мир ролет веб магазин рулонные шторы в киеве

2.
Remove the intake manofold.
3.
Remove the oil level pipe(A).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

4.
Install in the reverse order of removal.

Oil Pressure Switch. Repair procedures
Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. Check the continuity between the terminal and the body ...

Intake And Exhaust System
...

See also:

Inhibitor Switch. Repair procedures
Inspection • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Power Circuit Inspection 1. Disconnect the Inhibitor swtich connector. ...

Seat Belt Buckle Switch (BS). Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The ...

Scheduled maintenance service
Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow Maintenance Under Severe Usage Conditions. ...