Hyundai Santa Fe (DM): Oil Pump. Components and Components Location
Component Location
|
1. Automatic transaxle 2. Oil pump assembly |
|
Component
|
1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal |
6. Bush-Housing 7. Reaction shaft 8. Bush- Reaction shaft 9. Sleeve 10. Flange bolt |
Oil pump operation flow
|
1. Inhale(Oil filter) 2. Inhale(Valve body) 3. Outlet 4. 26/B operation pressure |
5. 35R/C operation pressure 6. Lubrication 7. Lock up clutch operation pressure 8. Lock up clutch cancellation |
Oil Pump. Description and Operation
Description The oil pump is built-in as a single unit with the 26Brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation ...
Fluid. Components and Components Location
Component Location 1. ATF Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...
See also:
Headrest
The driver's and front passenger's seats are equipped with a headrest for the occupant's safety and comfort. The headrest not only provides comfort for the driver and front passenger, but ...
Tail Gate Weatherstrip. Repair procedures
Replacement 1. Remove the tail gate weatherstrip (A). • Do not apply sealant to the body. 2. Install in the reverse order of removal. • Install the weatherstrip aligned with canter line (B). ...
Specifications
Specifications Item Specification Master cylinder • Type • I.D. mm(in) • Piston stroke mm(in) • Fluid level switch Fixed type 22.22 mm (0.875 in) 45 ± 1 mm (1.77 ± 0.039 in) Provided ...
