Hyundai Santa Fe (DM): Oil Seal. Repair procedures
Replacement
[Right side]
1. |
Remove the driveshaft assembly. (RH side)
|
2. |
Remove the dust cover (A).
|
3. |
Remove the oil seal (A, B).
|
4. |
Install the oil seal with special service tools.
|
5. |
Install the new dust cover (A).
|
6. |
Add to transfer fluid.
|
7. |
Install the drive shaft assembly. (RH side)
|
[Left side]
1. |
Remove the transfer assembly from the transaxle assembly.
|
2. |
Remove the oil seal (A).
|
3. |
Install the oil seal with special service tools.
|
4. |
Add to transfer fluid.
|
5. |
Install the transfer assembly.
|
Front Wheel Repair procedures
Removal 1. Remove the driveshaft and axle. 2. Remove the propeller shaft (A). Tightening torque : 49.0~68.6N.m (5.0~7.0kgf.m, 36.2~50.6lb-ft) 3. Loosen the transfer upper & lower mounting bolts. (transfer ...See also:
Brake Pedal. Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the shower duct (A). 4. Disconnect the stop lamp switch connector (A). ...
To set cruise control speed
1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which must be more than ...