Hyundai Santa Fe (TM): Troubleshooting
Troubleshooting |
Symptom |
Suspect area |
Engine will not start or hard to start |
Vapor hose damaged or disconnected |
Engine struggles to start |
Malfunction of the Purge Control Solenoid Valve |
Rough idle or engine stalls |
Vapor hose damaged or disconnected |
Malfunction of the PCV valve |
|
Rough idle |
Malfunction of the Evaporative Emission Control System |
Excessive oil consumption |
Positive crankcase ventilation line clogged |
Components and components location
Components Location 1. Crankcase pressure regulating valve (PRV) 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank air filter 5. Catalytic converter (WCC) 6. Catalytic converter (UCC) 1. ...Specifications
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 20.0 - 22.0 [20°C (68°F)] ...See also:
Crash Pad Lower Panel. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Air Ventilation Seat. Schematic
Diagrams
Circuit Diagram ...
Electronic Stability Control (ESC) OFF Indicator Light
This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When you deactivate the ...