Hyundai Santa Fe (DM): Positive Crankcase Ventilation (PCV) Valve. Repair procedures - Crankcase Emission Control System - Emission Control SystemHyundai Santa Fe (DM): Positive Crankcase Ventilation (PCV) Valve. Repair procedures

Removal

1.
Disconnect the vapor hose (A).
2.
Remove the PCV valve (B).


Inspection

1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Installation

1.
Install in the reverse order of removal.

PCV Valve installation:
1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft)


See also:

Quarter Garnish. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “clicks” one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is securely ...

Turn Signal Lamp. Repair procedures
Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror holder (A) from the outside mirror assembly. Be careful not to damage the fixing clip 3. Remove ...