Hyundai Santa Fe (DM): Power Door Lock Actuators. Repair
procedures
Inspection
Front Door Lock Module Inspection
| 1. |
Remove the front door trim.
|
| 2. |
Remove the front door module.
|
| 3. |
Disconnect the connectors from the actuator.
|
| 4. |
Check actuator operation by connecting power and
ground according to the table. To prevent damage to the actuator, apply
battery voltage only momentarily.
|
| 5. |
Check for continuity between the terminals in each
switch position according to the table.
|
Rear Door Lock Module Inspection
| 1. |
Remove the rear door trim.
|
| 2. |
Remove the rear door module.
|
| 3. |
Disconnect the connectors from the actuator.
|
| 4. |
Check actuator operation by connecting power and
ground according to the table. To prevent damage to the actuator, apply
battery voltage only momentarily.
|
| 5. |
Check for continuity between the terminals in each
switch position according to the table.
|
Tailgate Lock Module Inspection
| 1. |
Remove the tailgate trim.
|
| 2. |
Disconnect the 4P connector from the actuator.
|
| 3. |
Check actuator operation by connecting power and
ground according to the table. To prevent damage to the actuator, apply
battery voltage only momentarily.
|
Tailgate Open Switch
| 1. |
Remove the tailgate trim.
|
| 2. |
Disconnect the 4P connector from the actuator.
|
| 3. |
Check for continuity between the terminals in each
switch position according to the table.
|
Hood Switch
| 1. |
Disconnect the connector (A) and bolts from the hood
switch.
|
| 2. |
Check for continuity between the terminals and ground
according to the table.
|
Burglar Horn
| 1. |
Remove the burglar horn after removing a bolt and
disconnect the 2P connector from the burglar horn.
|
| 2. |
Test the burglar horn by connecting battery power
to the terminal 1 and ground the terminal 2.
|
| 3. |
The burglar horn should sound. If the burglar horn
fails to sound replace it.
|
Components and Components Location
Component Location 1. Driver power window main switch 2. Passenger window switch 3. IPM (Intalligent intergrated Platform Module) 4. Door lock switch 5. Tailgate lock actuator & switch 6. Front door ...
Power Door Lock Switch. Repair
procedures
Diagnosis With GDS 1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of power ...
See also:
Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate the keys easily. Remove the bar ...
Seat Belt Buckle Switch (BS). Components and Components Location
Components ...
Crach Pad Center Panel. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
