Hyundai Santa Fe (DM): Power Door Lock Switch. Repair
procedures
Diagnosis With GDS
| 1. |
The BCM can be diagnosed by using the GDS. The BCM
communicates with the GDS which then displays inputs and outputs along
with codes.
It will be able to diagnose defects of power door
lock/unlock with GDS quickly. GDS can operates actuator forcefully,
input/output value monitoring and self diagnosis.
|
| 2. |
To diagnose the SJB function, select the vehicle
model, BCM and DDM.
|
| 3. |
Select "Input/output monitoring", if you will check
current data of power door lock system. It provides input/output status
of DDM.
Смотрите информацию granite countertop slabs у нас.
|
| 4. |
To perform functional test on SJB outputs, select
"Actuation Test".
|
Removal
Driver Power Window Switch
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front door trim.
|
| 3. |
Remove the power window bezzel assembl (A) after
loosening the mounting screws (12EA).
|
| 4. |
Remove the power window switch assembly (A) after
loosening the mounting screws (6EA).
|
Installation
Driver Power Window Switch
| 1. |
Install the power window switch assembly.
|
| 2. |
Install the front door trim after connect the connector.
|
Power Door Lock Actuators. Repair
procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. 2. Remove the front door module. 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power ...
See also:
SS-A Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram ...
Radiator Grill. Components and Components Location
Component Location 1. Radiator grill ...
Transmitter. Repair
procedures
Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red light doesn't flicker. Standard ...
