Hyundai Santa Fe (DM): Power Door Mirror Switch. Repair 
procedures - Power Door Mirrors - Body Electrical SystemHyundai Santa Fe (DM): Power Door Mirror Switch. Repair procedures

Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the front left door trim.
3.
Remove the power mirror switch (A) from the door trim.


Installation

1.
Install the power mirror switch.
2.
Install the front door trim after connecting the connector.
3.
Connect the negative (-) battery terminal.

Inspection

1.
Remove the front left door trim.
2.
Remove the power mirror switch (A) from the door trim.

3.
Check for continuity between the terminals in each switch position according to the table.
[Power Mirror Switch]


Power Door Mirror Actuator. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (B) after removing the front door quadrant cover (A). 3. Disconnect the power door mirror connector (A) from the ...

See also:

Front Strut Assembly. Components and Components Location
Components 1. Strut assembly 2. Insulator 3. Bearing 4. Spring upper pad 5. Spring 6. Dust cover 7. Spring lower pad ...

Vehicle handling instructions
As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control, an accident or vehicle rollover. Specific design characteristics (higher ground clearance, ...

Power Window Motor. Repair procedures
Inspection Front Power Window Motor 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. 3. Disconnect the connector (A) from the motor. (A : Safety, B : Standard) 4. Connect ...