Hyundai Santa Fe (DM): Power outlet - Interior features - Features of your vehicleHyundai Santa Fe (DM): Power outlet

Front

Front

Center

Center

Rear

Rear

The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps with the engine running.

CAUTION

  • Use the power outlet only when the engine is running and remove the accessory plug after use. Using the accessory plug for prolonged periods of time with the engine off could cause the battery to discharge.
  • Only use 12V electric accessories which are less than 10A in electric capacity.
  • Adjust the air-conditioner or heater to the lowest operating level when using the power outlet.
  • Close the cover when not in use.
  • Some electronic devices can cause electronic interference when plugged into a vehicle’s power outlet. These devices may cause excessive audio static and malfunctions in other electronic systems or devices used in your vehicle.

WARNING

Do not put fingers or foreign elements (pin, etc.) into a power outlet and do not touch with a wet hand. You may get an electric shock.

Sunvisor
Use the sunvisor to shield direct light through the front or side windows. To use a sunvisor, pull it downward. To use a sunvisor for a side window, pull it downward, unsnap it from the bracket (1) and ...

Clothes hanger
To use the hanger, pull down the upper portion of hanger. CAUTION Do not hang heavy clothes, because it may damage the hook. ...

See also:

Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label
Vehicle Identification Number (VIN) The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc. The number is punched ...

Specifications
Specifications Item Specifications Transaxle  type A6MF2 Engine model Gasoline  2.4GDI Torque converter type 3-element, 1-stage, 2-phase type Torque converter size Ø236 mm (9.2913 in.) ...

Oil Pan. Repair procedures
Removal 1. Remove the drive belt.   2. Remove the A/C compressor. 3. Remove the A/C compressor bracket (A). 4. Drain the engine oil. 5. Remove the oil pan (A). Insert the blade of SST (09215-3C000) ...