Hyundai Santa Fe (DM): Push-starting
Vehicles equipped with automatic transaxle cannot be push-started.
Follow the directions in this section for jump-starting.
WARNING
Never tow a vehicle to start it because the sudden surge forward when the engine starts could cause a collision with the tow vehicle.
Jump starting procedure
✽ NOTICE If the battery is discharged, the engine can be started using a battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles. To prevent personal ...
If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the road and ...
See also:
Front Hub / Knuckle / Tone Wheel. Components and Components Location
Components 1. Knuckle 2. Dust cover 3. Hub assembly 4. Brake disc ...
Forward and backward
1. Push the control switch forward or backward to move the seat to the desired position. 2. Release the switch once the seat reaches the desired position. ...
High Beam Indicator Light
This indicator light illuminates: When the headlights are on and in the high beam position When the turn signal lever is pulled into the Flash-to-Pass position. ...
