Hyundai Santa Fe (DM): Radiator Grill. Repair procedures - Front Bumper - Body (Interior and Exterior)Hyundai Santa Fe (DM): Radiator Grill. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the front bumper cover.
2.
Detach the clips (B), then remove the front bumper energy absorber (A).

3.
Loosen the radiator grill mounting screws.
4.
Unlock the lock pins (B) by pushing it up with a screwdriver or remover and then remove the radiator grill (A).

5.
Install in the reverse order of removal.
•
Replace any damaged clips.

Radiator Grill. Components and Components Location
Component Location 1. Radiator grill ...

See also:

Flex Steer. Schematic Diagrams
Circuit Diagram ...

Fuel Filler Door Open Switch. Repair procedures
Inspection 1. Remove the front door trim. 2. Disconnect the switch connector (A) from wiring. 3. Check the switch for continuity between the No. 1 and No. 2 terminals. If the continuity is not as specified, ...

Rear Door Module. Components and Components Location
Component Location 1. Rear door module ...