Hyundai Santa Fe (DM): Rear Assist Arm. Repair procedures - Rear Suspension System - Suspension SystemHyundai Santa Fe (DM): Rear Assist Arm. Repair procedures

Removal

1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

2.
Remove the sprit pin and castle nut or bolt and then disconnect the rear assist arm (A) from the rear axle.
Tightening torque :
2WD
44.1 ~ 53.9N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)
4WD
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)
[2WD]

[4WD]
3.
Loosen the bolt & nut and then remove the rear assist arm (A) with the sub frame.
Tightening torque :
2WD
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)
4WD
137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)
[2WD]

[4WD]
4.
Installation is the reverse of removal.
5.
Check the rear alignment.

Inspection

1.
Check the bushing for wear and deterioration.
2.
Check the rear assist arm for deformation.

Trailing Arm. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...

Rear Stabilizer Bar. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...

See also:

Brake Booster. Components and Components Location
Components (1) 1. Brake booster 2. Master cylinder assembly 3. O-ring Components (2) 1. Vacuum pump 2. Bracket ...

Parking Brake Cable. Repair procedures
Removal Parking brake pedal Type 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the parking brake cable mounting nut (A) and bolts(B). ...

Fan speed control
The fan speed can be set to the desired speed by turning the fan speed control knob. The higher the fan speed is, the more air is delivered. To turn off the fan speed, press the OFF button. ...