Hyundai Santa Fe (DM): Rear Center Seat Belt Retractor. Repair procedures - Rear Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Center Seat Belt Retractor. Repair procedures

Replacement

•
When installing the belt, make sure not to damage the retractor.
1.
Remove the second row seat back cover [LH].
2.
Loosen the rear center seat belt lower anchor mounting bolt (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
After loosening the mounting nut (B), then remove the rear center seat belt retractor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
•
Replace any damaged clips.

Rear Center Seat Belt Retractor. Components and Components Location
Component Location 1. Rear center seat belt retractor ...

Rear Seat Belt Buckle. Components and Components Location
Component Location [Second row seat belt buckle] 1. Second row seat belt buckle [LH] 2. Second row center seat belt buckle 3. Second row seat belt buckle [RH] [Third row seat belt buckle] 1. Third row ...

See also:

Specifications
Specifications Item Specification Master cylinder • Type • I.D. mm(in) • Piston stroke mm(in) • Fluid level switch   Fixed type 22.22 mm (0.875 in) 45 ± 1 mm (1.77 ± 0.039 in) Provided ...

Curtain Airbag (CAB) Module. Components and Components Location
Components ...

If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the road and ...