Hyundai Santa Fe (DM): Rear Combination Lamp. Repair procedures - Lighting System - Body Electrical SystemHyundai Santa Fe (DM): Rear Combination Lamp. Repair procedures

Removal

1.
Disconnect the negative (-) battery terminal.
2.
Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B).

3.
If it is necessary to replace the bulb, remove the rear combination cover (A).

4.
Remove the bulb (A) after disconnecting the connector.

5.
Remove the tailgate trim.
6.
Remove the inside rear combination lamp assembly (A) after loosening the nuts (4EA) and disconnecting the connector.

7.
Remove the bulb (B) after separating the inside rear combination lamp assembly (A).

8.
If it is necessary to replace the bulb, remove the bulb after removing the tailgate cover.

Installation

1.
Install the tailgate combination lamp assembly after assembling the bulb.
2.
Install the lamp cover to the tailgate after connecting the lamp connector.
3.
Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector.

Luggage Room Lamp. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp lens (A) with a flat-tip screwdriver after loosening the screws (2EA). 3. Remove the luggage room lamp bulb (A). ...

Troubleshooting
Troubleshooting Symptom Possible cause Remedy One lamp does not light (all exterior) Bulb burned out Replace bulb Socket, wiring or ground faulty Repair if necessary Head lamps do not light Bulb burned ...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram ...

Air bag inflation conditions
Front air bags Front air bags are designed to inflate in a frontal collision depending on the intensity, speed or angles of impact of the front collision. ❈ The actual air bags in the vehicle may ...

Input Speed Sensor. Description and Operation
Description Input speed sensor (A) is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the Transaxle Control Module(TCM). The sensor ...