Hyundai Santa Fe (DM): Rear Door Belt Outside Weatherstrip. Repair procedures - Rear Door - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Door Belt Outside Weatherstrip. Repair procedures

Hyundai Santa Fe DM 2013-2018 Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Outside Weatherstrip. Repair procedures

Replacement

1.
Pull down rear door window glass by pressing the power window glass switch.
2.
After loosening the mounting screws, then remove the rear door belt outside weatherstrip (A).
3.
Install in the reverse order of removal.
•
Replace any damaged clips.

Rear Door Latch. Repair procedures
Replacement 1. Remove the rear door module. 2. Remove the rear door outside handle base (A) by pushing in the lock pins located in the back. 3. Remove the rear door outside handle base cable (A). 4. Open ...

Rear Door Belt Inside Weatherstrip. Repair procedures
Replacement 1. Remove the rear door trim. 2. Remove the rear door belt inside weatherstrip (A). 3. Install in the reverse order of removal. • Replace any damaged clips. ...

See also:

Front Seat Cushion Cover. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Key operations
Used to start the engine. Used to lock and unlock the doors. Used to lock and unlock the glove box. To unfold the key, press the release button then the key will unfold automatically. To fold the key, ...

ETC (Electronic Throttle Control) System. Schematic Diagrams
Circuit Diagram ...