Hyundai Santa Fe (DM): Rear Door Inside Handle. Repair procedures - Rear Door - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Door Inside Handle. Repair procedures

Replacement

1.
Remove the rear door trim.
2.
After loosening the mounting screws, then remove the rear door inside handle (A).
3.
Install in the reverse order of removal.
•
Make sure the door locks/unlocks and opens/closes properly.
•
Replace any damaged clips.

Rear Door Trim. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Rear Door Window Glass. Components and Components Location
Component Location 1. Rear door window glass ...

See also:

Rear Seat Belt Retractor. Repair procedures
Replacement [Second row seat belt assembly] • When installing the belt, make sure not to damage the retractor. 1. Remove the rear pillar trim. 2. After loosening the mounting bolt, then remove the second ...

Engine Coolant Temperature Sensor (ECTS). Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 48.14 -20 -4 14.13 ~ 16.83 0 32 5.79 20 68 2.31 ~ 2.59 40 104 1.15 60 140 0.59 80 176 0.32 ...

Turn Signal Indicator Light
This indicator light blinks: • When you turn the turn signal light on. If any of the following occurs, there may be a malfunction with the turn signal system. In this case, have your vehicle inspected ...