Hyundai Santa Fe (DM): Rear Door Outside Handle. Repair procedures - Rear Door - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Door Outside Handle. Repair procedures

Replacement

1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the rear door outside handle cover (A).

Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

3.
Remove the rear door outside handle (A) by sliding it rearward.

4.
Install in the reverse order of removal.
•
Make sure the door locks/unlocks and opens/closes properly.

Rear Door Outside Handle. Components and Components Location
Component Location 1. Rear door outside handle ...

Rear Door Latch. Components and Components Location
Component Location 1. Rear door latch ...

See also:

Troubleshooting
Troubleshooting Symption Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Worn crankshaft bearings Loose or out of specification engine flywheel Replace the crankshaft and ...

CVVT Oil Control Valve (OCV). Specifications
Specification Item Specification Coil Resistance (Ω) 6.9 ~ 7.9 [20°C(68°F)] ...

Seats
Front seat (1) Forward and backward (2) Seatback angle (3) Seat cushion height (Driver’s seat) (4) Lumbar support (Driver’s seat)* (5) Seat warmer* / Air ventilation seat* (6) Headrest Rear seat (7) ...