Hyundai Santa Fe (DM): Rear Glass Defogger Switch. Repair procedures
Inspection
| 1. |
The windshield deicer switch inputs can be checked
using the GDS.
|
| 2. |
To check the input value of windshield deicer switch,
select option "Body Control Module".
|
| 3. |
Select option "Current Data".
|
| 4. |
To perform functional test on SJB outputs, select
"Actuation Test".
|
Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the audio unit or the AVN head unit.
|
| 3. |
Remove the heater and A/C controll unit.
|
Installation
| 1. |
Install the heater and A/C control unit.
|
| 2. |
Install the audio unit or the AVN head unit.
|
| 3. |
Connect the negative (-) battery terminal.
|
Rear Glass Defogger Printed Heater. Repair procedures
Inspection Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the tin foil, moving the tin foil along the grid line to check for open ...
See also:
A/V Mode
This mode displays the state of the A/V system. ...
Description and Operation
Description Emissions Control System consists of three major systems. • Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the ...
Coolant. Repair procedures
Refilling And Bleeding Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator. When pouring engine coolant, be ...
