Hyundai Santa Fe (DM): Rear Hub - Carrier. Repair procedures
Removal
1. |
Remove the front wheel and tire (A) from front hub.
|
2. |
Remove the rear brake caliper.
|
3. |
Remove the wheel speed sensor (A), from the knuckle.
|
4. |
Remove the coking nut (A).
|
5. |
Remove the parking brake cable.
|
6. |
Remove the rear upper arm (A) after loosen the bolt (B).
[2WD]
[4WD]
|
7. |
Remove the rear strut assembly (C) after loosen the bolt (B) and
nut (A).
|
8. |
Remove the rear lower arm (B), spring (C) as loosening bolt (A)
after supporting rear lower arm (B) with jack.
|
9. |
Remove the rear assist arm (C), trailing arm (D) as loosening
bolt (A), nut (B).
|
10. |
Separate the end (B) of rear driveshaft on rear axle assembly
(A).
|
11. |
Install in the reverse order of removal.
|
12. |
Check the rear alignment.
|
Disassembly
1. |
Remove the hub assembly mounting bolts (A-4ea) from the rear axle
carrier (B).
|
2. |
Remove the hub assembly (C) and the parking brake assembly (B)
from the rear axle carrier (A).
|
3. |
Assembly is the reverse order of disassembly.
|
Inspection
1. |
Check the hub for cracks and the splines for wear.
|
2. |
Check the rear axle carrier for cracks.
|
Rear Hub - Carrier. Components and Components Location
Components 1. Rear carrier assembly 2. Parking brake assembly 3. Rear hub assembly 4. Rear brake disc ...See also:
Rear Glass Defogger Switch. Repair procedures
Inspection 1. The windshield deicer switch inputs can be checked using the GDS. 2. To check the input value of windshield deicer switch, select option "Body Control Module". 3. Select option ...
Water pump. Components and Components Location
Components 1. Water pump pulley 2. Water pump 3. Water pump gasket 4. Water pump housing 5. Water pump housing gasket 6. O-ring 7. Water inlet pipe ...
Front Seat Belt Buckle. Components and Components Location
Component Location 1. Front seat belt buckle ...