Hyundai Santa Fe (DM): Rear Mud Guard. Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Mud Guard. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the rear mud guard (A).

2.
Install in the reverse order of removal.
•
Replace any damaged clips.

Front Mud Guard. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Side Sill Molding. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Fuel Pressure Control Valve. Troubleshooting
Signal Waveform ...

Variable Intake Solenoid (VIS) Valve. Schematic Diagrams
Circuit Diagram ...

How to use this manual
We want to help you get the greatest possible driving experience from your vehicle. Your Owner’s Manual can assist you in many ways. We strongly recommend that you read the entire manual. In order to ...