Hyundai Santa Fe (DM): Rear Pillar Trim. Repair procedures - Interior Trim - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Pillar Trim. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the luggage side trim.
2.
After loosening the mounting bolt, then remove the rear pillar trim (A).
Купить в Дедовск известняковый щебень для дорожного строительства.

3.
Install in the reverse order of removal.
•
Replace any damaged clips.

Rear Pillar Trim. Components and Components Location
Component Location 1. Rear pillar trim ...

Trunk Trim
...

See also:

Horn
To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed. Check the horn regularly to be sure it operates ...

Timing Chain Cover. Repair procedures
Removal • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. Mark all wiring and hoses to avoid misconnection. ...

Armed stage
Using the smart key (if equipped) Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine. 2. Make sure that all doors, the engine hood and tailgate lid are closed ...