Hyundai Santa Fe (DM): Rear Seat Belt Retractor. Repair procedures
Replacement
[Second row seat belt assembly]
|
1. |
Remove the rear pillar trim.
|
2. |
After loosening the mounting bolt, then remove the second row
seat belt upper anchor (A).
|
3. |
After loosening the mounting bolt, then remove the second row
seat belt retractor (A).
|
4. |
Install in the reverse order of removal.
|
[Third row seat belt assembly]
|
1. |
Remove the luggage side trim.
|
2. |
After loosening the mounting bolt, then remove the third row seat
belt upper anchor (A).
|
3. |
After loosening the mounting bolt, then remove the third row seat
belt webbing guide (A).
|
4. |
After loosening the mounting bolt, then remove the third row seat
belt retractor (A).
|
5. |
Install in the reverse order of removal.
|
Rear Seat Belt Retractor. Components and Components Location
Component Location 1. Second row seat belt retractor 2. Third row seat belt retractor ...Rear Center Seat Belt Retractor. Components and Components Location
Component Location 1. Rear center seat belt retractor ...See also:
SRS components and functions
The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side impact air bag modules 4. Curtain air bag modules 5. Retractor pre-tensioner ...
Components and Components Location
Component Location 1. Cowl top cover ...
Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off. If your vehicle is equipped with the theft alarm system, the interior lights automatically turn ...