Hyundai Santa Fe (DM): Rear Seat Cushion Cover. Repair procedures
Replacement
[Second row seat assembly]
(LH) |
|
|
1. |
Remove the second row seat assembly [LH].
|
2. |
Remove the protector (A) located in the bottom side of the rear
seat cushion.
|
3. |
After loosening the mounting screw, then remove the rear seat
slide knob (A).
|
4. |
After loosening the mounting screw, then remove the rear seat
slide outer cover (A).
|
5. |
Remove the protector (A) located in the side part of the rear
seat cushion.
|
6. |
Remove the rear seat cushion cover (A) from the rear seat cushion
frame.
|
7. |
After removing the velcro tape (A) on the rear of seat cushion
and remove the rear seat cushion cover (B).
|
8. |
Install in the reverse order of removal.
|
(RH) |
|
|
1. |
Remove the second row seat assembly [RH].
|
2. |
Remove the protector (A) located in the bottom side of the rear
seat cushion.
|
3. |
After loosening the mounting screw, then remove the rear seat
slide knob (A).
|
4. |
After loosening the mounting screw, then remove the rear seat
slide outer cover (A).
|
5. |
Remove the protector (A) located in the side part of the rear
seat cushion.
|
6. |
Remove the rear seat cushion cover (A) from the rear seat cushion
frame.
|
7. |
After removing the velcro tape (A) on the rear of seat cushion
and remove the rear seat cushion cover (B).
|
8. |
Install in the reverse order of removal.
|
[Third row seat assembly]
|
|
1. |
Remove the third row seat assembly.
|
2. |
Loosen the rear seat frame mounting bolts (A).
|
3. |
Push the rear seat cushion frame (A) to the front of the vehicle
as far as possible.
|
4. |
After loosening the mounting screw, then remove the rear seat
outer link cover (A).
|
5. |
After loosening the mounting screw, then remove the rear seat
inner link cover (A).
|
6. |
Remove the protector (A) located in the side part of the rear
seat cushion.
|
7. |
Remove the rear seat cushion cover (A) from the rear seat cushion
frame.
|
8. |
After removing the velcro tape (A) on the rear of seat cushion
and remove the rear seat cushion cover (B).
|
9. |
Install in the reverse order of removal.
|
Rear Seat Cushion Cover. Components and Components Location
Component Location [Second row seat assembly] 1. Rear seat cushion cover [LH] 2. Rear seat cushion cover [RH] [Third row seat assembly] 1. Rear seat cushion cover [LH] 2. Rear seat cushion cover [RH] ...Rear Seat Latch. Components and Components Location
Component Location [Second row seat assembly] 1. Rear seat latch [Third row seat assembly] 1. Rear seat latch ...See also:
Fuel Tank Pressure Sensor (FTPS). Description and Operation
Description Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solenoid ...
Front Door Outside Handle. Components and Components Location
Component Location 1. Front door outside handle ...
Repair procedures
Adjustment Description The friction material inside the coupling will degrade over time. Therefore, corresponding compensation values must be referenced and entered after replacing the controller or the ...