Hyundai Santa Fe (DM): Rear Transverse Trim. Repair procedures - Interior Trim - Body (Interior and Exterior)Hyundai Santa Fe (DM): Rear Transverse Trim. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
After loosening the mounting screws, then remove the luggage floor box (A).
2.
Using a screwdriver or remover, remove the rear transverse trim (A).
3.
Install in the reverse order of removal.
•
Replace any damaged clips.

Rear Transverse Trim. Components and Components Location
Component Location 1. Rear transverse trim ...

Luggage Side Trim. Components and Components Location
Component Location 1. Luggage side trim ...

See also:

Necessary inspections
Fluid levels, such as engine oil, engine coolant, brake fluid, and washer fluid should be checked on a regular basis, with the exact interval depending on the fluid. Further details are provided in Section ...

Engine compartment
Gasoline 2.4L GDI 1. Engine coolant reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Air cleaner 5. Fuse box 6. Negative battery terminal 7. Positive battery terminal 8. Radiator cap 9. ...

Propeller Shaft. Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tightening torque: 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft) 2. Remove ...