Hyundai Santa Fe (DM): Rearview camera - Features of your vehicleHyundai Santa Fe (DM): Rearview camera

The rearview camera will activate when the back-up light is ON with the ignition

The rearview camera will activate when the back-up light is ON with the ignition switch ON and the shift lever in the R position.

This system is a supplemental system that shows behind the vehicle through the monitor while backing-up.

WARNING

  • This system is a supplementary function only. It is the responsibility of the driver to always check the inside/outside rearview mirror and the area behind the vehicle before and while backing up.
  • Always keep the camera lens clean. If the lens is covered with foreign matter, the camera may not operate normally.

✽ NOTICE

The rearview camera may not operate normally, in extremely high or low temperatures (operating temperature : -13°F~149°F (-20°C~65°C)).

Rear parking assist system precautions
The rear parking assist system may not sound sequentially depending on the speed and shapes of the objects detected. The rear parking assist system may malfunction if the vehicle bumper height or sensor ...

Hazard warning flasher
Type A Type B The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far ...

See also:

Operating door locks from inside the vehicle
With the door lock button To unlock a door, push the door lock button(1) to the “Unlock” position. The red mark (2) on the button will be visible. To lock a door, push the door lock button(1) to the ...

Alternator. Description and Operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage of ...

Compass function
The Compass can be turned ON and OFF and will remember the last state when the ignition is cycled. To turn the display feature ON/OFF: 1. Press and release the button to turn the display feature OFF. 2. ...