Hyundai Santa Fe (DM): Relay Box (Passenger Compartment). Repair procedures - Fuses And Relays - Body Electrical SystemHyundai Santa Fe (DM): Relay Box (Passenger Compartment). Repair procedures

Hyundai Santa Fe DM 2013-2018 Service Manual / Body Electrical System / Fuses And Relays / Relay Box (Passenger Compartment). Repair procedures

Fuse Inspection

1.
Be sure there is no play in the fuse holders, and that the fuses are held securely.
2.
Are the fuse capacities for each circuit correct?
3.
Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.

Inspection

1.
The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes.
2.
To diagnose the SJB function, select the vehicle model, BCM and SJB.
3.
To consult the present input/out value of SJB, "Current DATA". It provides information of SJB input/output conditions.
4.
To perform functional test on SJB outputs, select "Actuation Test"

Removal

Passenger Compartment Junction Box (SJB)
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
3.
Disconnect the connectors from the fuse side of the smart junction box.
4.
Remove the smart junction box after loosening the mounting nuts (2EA) and bolt.
5.
Disconnect the connectors from the back side of the smart junction box.

Installation

1.
Install the smart junction box.
2.
Install the crash pad lower panel.
3.
Check that all system operates normally.

Relay Box (Passenger Compartment). Description and Operation
Description Smart Junction Box(SJB) 1. General function : Interior Junction Box + some functions of BCM It controls loads with CAN communication and IPS. 2. Main function A. Low speed CAN communication(100 ...

ICM (Integrated Circuit Module) Relay Box. Components and Components Location
Component ...

See also:

Important safety precautions
You will find many safety precautions and recommendations throughout this section, and throughout this manual. The safety precautions in this section are among the most important. Always wear your seat ...

Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator light on the ...

Camshaft Position Sensor (CMPS). Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston position ...