Hyundai Santa Fe (DM): Repair procedures - Crankcase Emission Control System - Emission Control SystemHyundai Santa Fe (DM): Repair procedures

Inspection

1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Inspect the PCV vlave operation.
(1)
Run the engine at idle.
(2)
Put a finger on the open end of the PCV valve.
(3)
Make sure that intake manifold vaccum can be felt.
The plunger inside the PCV valve will move back and forth at vacuum.

4.
If the vacuum is not felt, clean or replace the vapor hose.

Schematic Diagrams
Schematic Diagram ...

Positive Crankcase Ventilation (PCV) Valve. Description and Operation
Operation Principle ...

See also:

Fluid. Components and Components Location
Component Location 1. ATF Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...

Overhead Console Lamp. Repair procedures
Inspection 1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. [General] [Panorama Sunroof] Removal ...

Crankcase Emission Control System
Schematic diagrams Schematic Diagram 1. PCV Valve 2. Breather hose 3. Air intake hose 4. Intake maifold 5. Air breather hose 6. Cylinder block Positive Crankcase Ventilation (PCV) Valve. Description and ...