Hyundai Santa Fe (DM): Repair procedures
Inspection
Steering Wheel Play Inspection
1. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
2. |
Measure the distance the steering wheel can be turned without
moving the front wheels.
|
3. |
If the play exceeds standard value, inspect the steering column,
shaft, and linkages.
|
Checking stationary steering effort
1. |
Position the vehicle on a level surface and place the steering
wheel in the straight ahead position.
|
2. |
Attach a spring scale to the With the engine speed 900 ~ 1100rpm,
pull the scale and read it as soon as the tires begin to turn.
|
3. |
If the measured value exceeds standard value, inspect the power
steering gear box and MDPS system.
|
Special Service Tools
Special Service Tools Tool (Number and Name) IIIustration Use 09561-11001 Steering wheel puller Remove the steering wheel ...Steering wheel
...See also:
Underdrive Brake Control Solenoid Valve(UD/B_VFS). Schematic Diagrams
Circuit Diagram ...
Rear Door Belt Outside Weatherstrip. Repair procedures
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, then remove the rear door belt outside weatherstrip (A). 3. Install in ...
To fold down the rear center seatback
1. Lower the rear headrests to the lowest position. 2. Push the center seatback folding lever up, then fold the seat toward the front of the vehicle. When you return the seatback to its upright position, ...