Hyundai Santa Fe (DM): Repair procedures - Fender - Body (Interior and Exterior)Hyundai Santa Fe (DM): Repair procedures

Replacement

•
Be careful not to damage the fender and body.
•
When removing the clips, use a clip remover.
1.
Remove the head lamps.
2.
Remove the side sill molding.
3.
Loosen the front wheel guard mounting clips and screws.
4.
Remove the fender side repeater lamp (A).
5.
Disconnect the fender side repeater lamp connector (B).
6.
Using a screwdriver or remover, remove the delta garnish (A).
7.
After loosening the mounting clips, then remove the fender side cover (A).
8.
After loosening the mounting screws, bolts, nut, then remove the fender assembly (A).
9.
Install in the reverse order of removal.
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.

Components and Components Location
Component Location 1. Fender assembly ...

Hood
...

See also:

Rear Seat Belt Buckle. Components and Components Location
Component Location [Second row seat belt buckle] 1. Second row seat belt buckle [LH] 2. Second row center seat belt buckle 3. Second row seat belt buckle [RH] [Third row seat belt buckle] 1. Third row ...

Tail Gate Latch. Components and Components Location
Component Location 1. Tail gate latch assembly ...

Multi box
To open the cover, push the lever (1) and the multi box will open automatically. It can be used for storing small items. CAUTION Do not drive with the multi box open. ...