Hyundai Santa Fe (DM): Repair procedures - Hood - Body (Interior and Exterior)Hyundai Santa Fe (DM): Repair procedures

Adjustment

1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
3.
After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up or down, or right or left.


Hood
...

Hood Assembly. Components and Components Location
Component Location 1. Hood assembly ...

See also:

Side Impact Sensor (SIS). Description and Operation
Description Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are installed at ...

SRS Control Module (SRSCM). Components and Components Location
Components ...

OFF mode
Push the OFF button to turn off the air climate control system. However, you can still operate the mode and air intake buttons as long as the ignition switch is in the ON position. ...