Hyundai Santa Fe (DM): Repair procedures - Cowl Top Cover - Body (Interior and Exterior)Hyundai Santa Fe (DM): Repair procedures

Replacement

1.
Remove the cap (A) and remove the nuts, then remove the wiper arm (B).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.
Detach the clips, then remove the fender side cover (A).
3.
Remove the glue on end of both sides (A) of the hood weatherstrip.
4.
Disconnect the nozzle hose (B).
5.
Detach the clips, then remove the cowl top cover (A).
6.
Install in the reverse order of removal.
•
Replace any damaged clips.

Components and Components Location
Component Location 1. Cowl top cover ...

Floor Console
...

See also:

Windshield defrosting and defogging
WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause ...

Components and Components Location
Components 1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain guide 7. Timing chain tensioner arm 8. Timing chain tensioner 9. Timing ...

One person per belt
Two people (including children) should never attempt to use a single seat belt. This could increase the severity of injuries in case of an accident. ...