Hyundai Santa Fe (DM): Repair procedures - Floor Carpet - Body (Interior and Exterior)Hyundai Santa Fe (DM): Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the console front complete assembly.
2.
Remove the front seat assembly.
3.
Remove the second row seat.
4.
Remove the third row seat.
5.
Remove the cowl side trim.
6.
Remove the center pillar lower trim.
7.
Remove the luggage side trim.
8.
Remove the floor carpet assembly (A).
9.
Remove the tunnel pad (B).
10.
Install in the reverse order of removal.
•
Replace any damaged clips.

1. Front car mat complete [LH]
2. Front car mat complete [RH]
3. Rear car mat complete
4. Floor carpet assembly
5. Tunnel pad


See also:

Specifications
Specifications Item Specifications Transaxle  type A6MF2 Engine model Gasoline  2.4GDI Torque converter type 3-element, 1-stage, 2-phase type Torque converter size Ø236 mm (9.2913 in.) ...

Components and Components Location
Components 1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly 7. Exhaust camshaft upper bearing 8. Exhaust camshaft ...

Glove Box Housing. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...