Hyundai Santa Fe (DM): Repair procedures
Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad center panel.
|
| 3. |
Disconnect the body control module connectors (A).
|
| 4. |
Remove the body control module (A) after loosening
the nuts.
|
Installation
| 1. |
Install the body control module.
|
| 2. |
Connect the body control module.
|
| 3. |
Install the crash pad center panel.
|
BCM Diagnosis With GDS
| 1. |
The body control module can diagnose by using the
GDS more quickly.
The BCM communicates with the GDS and then reads
the input/output value and drives the actuator.
|
| 2. |
To diagnose the BCM function, select the menu of
model and body control module.
|
| 3. |
Select "Input/output monitoring", if you will check
current data of body network system. It provides input/output status
of each module.
|
| 4. |
If you will check each module data operation forcefully,
select "Actuation test".
|
| 5. |
If you want to change user option, select “user option”.
|
Description and Operation
Description Body Control Module Controls The Followings - Wiper & Washer Control - Defroster Control - Driving Control - Tailgate Control - Window Control - Interior Control - Exterior Control - Panic ...
Seat Electrical
...
See also:
Repair procedures
Removal 1. Remove the front bumper cover. 2. Remove the bolts and disconnect the horn connectors, then remove the high pitch horn (A) and low pitch horn (B). [Disk type] [Shell type] Installation 1. Install ...
Direct Electro Hydraulic Actuator Coupling. Repair procedures
Inspection All units are filled up with coupling fluid (ultra-low viscosity ATF) prior to shipping. Inspection, fill-up, and replacement of coupling fluid is therefore not necessary (zero maintenance, ...
Rear Seat Belt Retractor. Repair procedures
Replacement [Second row seat belt assembly] • When installing the belt, make sure not to damage the retractor. 1. Remove the rear pillar trim. 2. After loosening the mounting bolt, then remove the second ...
