Hyundai Santa Fe (DM): Repair procedures
Inspection
1. |
Remove the cowl top cover.
|
2. |
Disconnect the windshield deicer connector (A) from
the wiper motor linkage.
|
3. |
Check for continuity between the terminals of deicer
lines.
|
4. |
Turn the ignition switch ON and the windshield deicer
switch ON, then measure the voltage between the terminals of harness
side deicer connector.
|
Description and Operation
Description Windshield deicer system prevent windshield wiper from freezing in the winter season. It consists of deicer in the lower part of windshield, switch and relay. Body control module receives an ...Windshield Deicer Switch. Repair procedures
Inspection 1. The windshield deicer switch inputs can be checked using the GDS. 2. To check the input value of windshield deicer switch, select option "Body Control Module". 3. Select option ...See also:
Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is armed. A door is opened without using the transmitter, smart key or mechanical key. The tailgate is opened without using the ...
Cruise Control Switch. Schematic Diagrams
Circuit Diagram ...
Emergency Fastening Device (EFD). Description and Operation
Description The Emergency Fastening Device (EFD) operates as well as the belt pretensioner at the same time, if it gets into its deploy condition after a collision. It is located near the anchor on the ...