Hyundai Santa Fe (DM): Repair procedures
Inspection
Check it by the procedure below to see if the function of
the ECM is normal.
1. |
Turn the ignition key to the "ON" position.
|
2. |
Cover the forward facing sensor.
|
3. |
Head a light to the rearward looking sensor.
|
4. |
The ECM should be darkened as soon as the rearward
looking sensor detects the light.
|
5. |
When the reverse gear is engaged, the ECM should
not be darkened.
When heading lights to both the forward facing and
rearward looking sensors, the ECM should not be darkened.
|
Removal
1. |
Remove the mirror wiring cover (A).
|
2. |
Remove the mirror mounting screw (A) and connector
(B).
|
3. |
Remove the mirror (A) pulling up in the arrow direction.
|
Installation
1. |
Install the mirror making sure the mounting bracket
not to be damaged.
|
2. |
Install the mirror wiring cover after reconnecting
the connector and tightening the screw.
|
Description and Operation
Description The ECM (Electro Chromatic inside rear view Mirror) is intended dim the reflecting light in the rear view mirror. The forward facing sensor detects brightness of the surroundings, while the ...See also:
Adjusting the height up and down
To raise the headrest : 1. Pull it up to the desired position (1). To lower the headrest : 1. Push and hold the release button (2) on the headrest support 2. Lower the headrest to the desired position ...
Service Mode
Service Interval Service in It calculates and displays when you need a scheduled maintenance service (mileage or days). If the remaining mileage or time reaches 900 mi. (1,500 km) or 30 days, "Service ...
Front Seat Assembly. Components and Components Location
Component Location 1. Front seat assembly ...