Hyundai Santa Fe (DM): Repair procedures - Back View Camera System - Body Electrical SystemHyundai Santa Fe (DM): Repair procedures

Removal

1.
Remove the tailgate trim.
2.
Remove the tailgate back panel.
3.
Disconnector the connector (A) from the back view camera.
4.
Remove the back view camera (B) after loosening the screws (2EA).

Installation

1.
Install the back view camera.
2.
Install the tailgate back panel and tailgate trim.

Description and Operation
Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle ...

Hyundai Santa Fe DM 2013-2018 Owner's Manual
Owners Manual for Third generation (DM) Hyundai Santa Fe. Hyundai launched its third-generation seven-seat Santa Fe here in September 2012 to do battle with the big players in the competitive large-SUV ...

See also:

Output Speed Sensor. Schematic Diagrams
Circuit Diagram ...

Operating door locks from inside the vehicle
With the door lock button To unlock a door, push the door lock button(1) to the “Unlock” position. The red mark (2) on the button will be visible. To lock a door, push the door lock button(1) to the ...

Repair procedures
Fuel Pressure Test 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) When removing the fuel pump relay, a Diagnostic Trouble ...